Welcome, Guest
Username: Password: Remember me
Build reports of air racer or record-breaking aircraft

TOPIC: Keith Rider R-3 and Marcoux-Bromberg Special-- Dek

Keith Rider R-3 and Marcoux-Bromberg Special-- Dek 3 years 10 months ago #135

  • wmoyer
  • wmoyer's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Have just completed Dekno's KR-3 and M-B Special. Pretty straight-forward builds. Due to the design (one-piece wing) of the kits, neither needs any reinforcing of the wings. The older KR-3 needs pins for the horizontal tail while the newer M-B Special kit has tabs and slots for the horizontal tail joints.

I did try out a couple of things that worked pretty well and will be fully shown in the SBT article. Highly Rrecommended.

Wayne Moyer
Attachments:
The administrator has disabled public write access.
Time to create page: 0.035 seconds